Vita Spa L100 Series Owner's Manual download pdf (Page 32)

D. DIGI-CHROMIUM

The Digi-Chromium option is activated by

pressing the Light button on the spa side

control.

To program the lights, press and hold the

Light button for 5 seconds.

Once the display reads L=XX, release the

button.

Using the arrow buttons, you may select the

different settings.

Review each setting to determine which

is best suited for you. The selection may

be changed at any time by repeating the

previous steps.

L=00 Off

L=01 DIiamond

L=02 Blue

L=03 Green

L=04 Red

L=05 Strobe effect Red/Green/Blue

L=06 Gradual change Red/Green/Blue

L=07 - 10 Combination Colors

L=11 - 20 Reduce Intensity 50%

L=21 - 20 Reduce Intensity 75%

The lighting system will automatically turn

itself off after three (3) hours.

D . W AV E S E AT

A c t i v a t i o n

The waveseat can be activated from either the

topside control or the remote control. From the

Topside control, one must press the “ L I G H T ”

button twice to activate the waveseat pump.

From the Remote control one presses “JET 3”.

The lights will remain on while the pump is in

operation.

Speed Switch

The speed switch may be used to select time

between cycles. The speed switch will only

function when the user has selected one of the

six sequences. Default speed is the slowest,

there is a 15 second delay between each step

(light will blink slowly). Depressing the speed

key once will delay 10 seconds. Twice will

reduce another 5 seconds between cycles (light

will blink rapidly). Three times, it will return the

cycle delay time to 15 seconds.

Pause Switch

To interrupt your massage sequence. You can

stop the cycles and keep the jets working in that

p a rticular spot for as long as you like or until the

main control times out after 30 minutes. To

r e s t a rt wave act io n, pr ess t he Pau se sw it ch a

second time. If the Pause switch is activated, the

first indicator light will stay on.

Sequence Switch

Allow the user to select the type of massage

they want. A total of 6 different sequeces are

p r o grammed into the system including one, in

which, all the valves are open. The lights on the

control pad indicated which cycle is operating at

the time. If all valves are open, the light

indicators should be off.

The press of the switch will sequence the cycles

forward. they can not be reveresed or modified.

The L.E.D. will flash for the corresponding cycle.

There are four lights that illustrate the jet pattern.

the user can preview the cycle selected at an

accelerated rate for 5 seconds prior to its actual

s t a rt. To accept the selected cycle, do not touch

the keypad for 5 seconds. The system will then

acknowledge the selected cycle and display the

L . E . D .

PAGE 29

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Comments to this Manuals

No comments

Vita Spa L100 Series Owner's Manual Page 32

Comments to this Manuals

Related products and manuals for Above ground pools Vita Spa L100 Series