Vita Spa L100 Series Owner's Manual download pdf (Page 31)

OPTIONAL FE AT U RES

PAGE 28

B. FRESH WATER MISTERS

Connection

Connect garden hose or supplied adapter

and Poly Hose kit from fresh water source to

spa “Inlet”

Activation

Turn on water source.

To activate misters, open valve located within

spa filtration compartment. Spa does not

need to be operating to operate misters.

Maintenance

Periodically Flush or replace in line filter.

Located inside panel (same side as water

source inlet). See your dealer for availability

or replacement

If Mister heads become clogged unscrew

(counterclockwise) and clean using a small

probe such as a needle

C. REMOTE CONTROL

Your spa model may come equipped with a

remote control located on the opposite side

of the spa from the main spa side control.

When pressing “ S OA K ” this will operate jets

one and two in low speed. Pressing “J E T 1”,

“JET 2 ”,or“JET 3” is high speed only. Th e

“ L I G H T ” button will activate your light. Th e

“A U X ” button will operate blower.

It can not be

used to program the spa.

NOTE: YOUR OPTIONAL “FLOATING REMOTE”

INSTRUCTION BOOK IS LOCATED IN A

SEPERATE MANUAL.

A. VITA TUNES

Country Code Setting

Advance the programming sequence to the

minute set position.

Hold down the “PROG” for 5 seconds and

observe that the screen shows CO=X (where

X is either U for USA, E for Europe, or J for

Japan)

Use the “UP” or “DOWN” buttons to change

the country, as required

S tereo Access and Volume Control

To access the stereo, press “ U P ” a n d

“DOWN” buttons on the spa control pad

simultaneously. The stereo will turn on, and

you will automatically be taken to the volume

control.

Your volume range is L0 through L8(L=00

equal off and L=08 is the loudest).

To adjust the volume level press “UP” or

“DOWN” arrows.

Bass

While in the volume mode, press “PROG”

Bass range is B00 through B008

Frequency Source

From Bass Mode, press “PROG” to select

source.

S=A equals A.M., S=F equals F.M., S=L equals

line input.

After source is selected, press “PROG” to exit

selection or use “UP” or “DOWN” keys to

scan stations.

In S=L you can connect optional Vita CD

player, or any other personal stereo device,

such as a walkman or MP3.

The “ V IE W ” button can be pressed to

escape the stereo mode.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Comments to this Manuals

No comments