Vita Spa LD-15 Series Owner's Manual download pdf (Page 20)

PAGE 17

soft cloth and a mild soap solution (1

teaspoon dish washing liquid with 2 gallons of

water), scrub lightly in circular motion. Then

rinse it thoroughly with plenty of water.

Condition the vinyl after cleaning by applying a

thin film of vinyl conditioner. NOTE: To

remove tree saps, use lighter fluid (not

charcoal lighter but the kind used in cigarette

lighters). Use sparingly and rinse with mild

soap solution afterwards. Wipe dry.

C A RE OF AC RYLIC SURFAC E

To maintain the surface of your spa, simply

clean with a soft damp cloth (a mild detergent

is okay) or with any glass cleaner. DO NOT

clean the surface with any type of abrasive as

it will dull the surface and natural luster of the

acrylic. DO NOT use any type of oil based

solvent. Such products can be very harmful to

the surface of the spa and will void the surface

warranty of the spa.

S PA LIGHT CO LO RED LENS RE M O VA L

In your owners packet you will find colored

lenses for your spa light. They can easily be

installed or removed by placing them over the

spa light and gently pushing on the outer edges

to install and pulling along the edges to remove.

LIGHT BULB RE PLAC E M E N T

1 . Turn off the power to the spa.

2 . Remove the front panel of the spa.

3 . Locate the spa light.

4 . Turn the bulb counter - clockwise 1/4 turn

to remove from its socket

5 . The replacement bulb is locked into place

by turning it clockwise 1/4 turn.

6 . Close up the cabinet and turn the power back on.

7. Check the Top Side display and adjust the time.

DIVERTER VA LV E

Over a period of time sand or grit may intrude

into your spa. The diverter valves may become

difficult to turn. It is important that the debris

be removed as soon as possible to avoid

damage to the valve.

1 . Turn off the power to the spa.

2 . Remove the diverter handle by pulling

upward and gently rocking it.

3 . Grasp the collar and turn it counter-clockwise.

4 . Lift the valve body up.

5 . Wipe the valve body and interior walls of

the valve with a soft cloth.

6 . Inspect the valve and valve walls for any

grooves caused by the debris.

7. Using a fine grit sandpaper, smooth down

any deep furrows.

8 . Wipe the valve and wall down with a damp

cloth and remove any debris left behind.

9 . Lubricate the valve body with a waterproof lubricant.

10 . Reassemble the valve and restore the

power to the spa.

11 . Check the Top Side display and adjust for time.

S PA MAIN T E N A N C E

S PA LIGHT

LIGHT BUL B

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Comments to this Manuals

No comments

Vita Spa LD-15 Series Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Above ground pools Vita Spa LD-15 Series