Vita Spa Spa Owner's Manual download pdf (Page 23)

Owner’s Manual

English

The 300 Control System oers you simplicity in

spa control. The backlit, Liquid Crystal Display

(LCD) displays current temperature, set water

temperature, and operating mode settings.

Each feature is actuated through the control

panel pad.

Touch the appropriate button to activate

the desired function.

At start up, when power is supplied to the spa,

the controls will operate properly and safely

under the factory settings. The spa will be in

Standard mode, have a temperature setting of

100°F (38°C), and a ltration cycle duration of

1 hour. To fully utilize the unique capabilities

of the control system, it is important to know

how to set the temperature, operate the

pumps, operate the light, adjust the mode

setting, and change the ltration cycle.

Note: In event of a power outage or failure,

the 300 Series Control System may retain

settings. If settings are lost, re-program per

the instructions in this manual.

User’s Pads

User’s Pads are the buttons located on the

topside control panel and are used to program

various spa functions (i.e., turn on spa light, set

temperature, etc.). The following table denes

the buttons:

Your Topside Control looks like

this, your spa has the following

features:

• Internal Light

• 1 Dual Speed Pump

Pad Use

• Decrease temperature

• Increase temperature

• Switch modes

• Change ler cycle durations

• Turn internal spa light on or o

• Switch modes

• Activate therapy pump

• Set duration of lter cycles

300 CONTROL PANEL

NOTE: The look of your topside control panel design and buttons will vary according to brand.

See table below for pictures and explanation of 300 Control Panel button functions.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 72 73

Comments to this Manuals

No comments

Vita Spa Spa Owner's Manual Page 23

Comments to this Manuals